China Suppliers Factory Single Phase Battery Charger 50-750VDC, 1-20A, High Efficiency for Various Battery Types
Application
1. Large, medium and small electric vehicle charging stations;
2. High-speed service areas, stations, docks and other transportation hub areas;
3. Public places such as urban residential areas, shopping plazas and electric business places.
Product Features
1. 5 inch color LCD touch screen, easy and simple to operate;
2. Power supply module is pluggable, convenient for later maintenance;
3. Input and output with protection circuit breaker hard switch, safe and reliable.
4. Can set the battery average charging voltage, float charging voltage, charging current, etc;
5. Timing charging, manual and automatic mode can be set;
6. With overheat, short circuit, overload, overvoltage, undervoltage and other protection functions;
7. 6U rack type is suitable for various standard cabinet installation; Cabinet type is suitable for high current charging station system.
Product Parameter
| Category | Name | Parameter |
|---|---|---|
| Environmental conditions | Operating temperature | -40°C ~ +75°C, derating is required when the temperature is above 55°C. |
| Storage temperature | -40℃ ~ +70℃ | |
| Relative humidity | ≤95%RH, No condensation | |
| Cooling way | Forced air cooling | |
| Altitude | 2000m, derating is required when the altitude is above 2000 m | |
| Atmospheric pressure | 79kPa ~ 106kPa | |
| AC input | Input phase | Single phase L/N or L1/L2 + PE |
| Voltage rage | 90-280Vac | |
| The maximum static voltage borne under no operation | 300Vac | |
| Rated voltage | 220Vac | |
| Maximum current | 32A | |
| Grid frequency | 45Hz~65Hz | |
| Rated frequency | 50Hz/60Hz | |
| DC output | Voltage range | 50-750Vdc |
| Rated Voltage | 110VDC | |
| Current range | 0 ~ 20A(Maximum current 9.3A when voltage is 750V) | |
| Steady voltage precision | <±0.5% | |
| Steady current precision | ≤±1%(rated range of 20% ~ 100% for output load) | |
| Load regulation rate | ≤±0.5% | |
| Power factor and THD | Power factor | ≥0.95 @20% to 50% of full load output power |
| ≥0.98 @50% to 100% full load output power | ||
| ≥0.99 @100% full load output power, nominal input voltage and frequency | ||
| THD | ≤5% @50% to 100% of full load output power | |
| Efficiency | ≥94.5%, @750V, 50% to 100% load current, at rated input voltage | |
| Other | Temperature coefficient (1/°C) | <20A |
| Noise | No greater than 65dB(A) (at 1m away) | |
Frequently Asked Questions
This system is designed for large, medium, and small EV charging stations, transportation hubs (high-speed service areas, stations, docks), and public commercial or residential areas such as shopping plazas and business districts.
The DC output voltage spans from 50Vdc to 750Vdc with a rated voltage of 110VDC. The current range is 0 to 20A, with a maximum current of 9.3A at 750V.
The unit is equipped with circuit breaker hard switches on input/output, and includes comprehensive protection against overheat, short circuit, overload, overvoltage, and undervoltage.
It supports standard 6U rack-type installation for standard cabinets as well as cabinet-type configurations tailored for high-current charging station systems. In addition, the power module is pluggable for convenient maintenance.
The module operates within -40°C to +75°C (derating required above 55°C) using forced air cooling, producing low noise levels of no greater than 65dB(A) measured at 1 meter.
Through the built-in 5-inch color LCD touch screen, operators can configure battery average charging voltage, float charging voltage, charging current, and toggle between timing charging, manual, and automatic modes.


