Products
power phase converter with AC-DC-AC
Product Feature
1.Wide voltage input 80-320VAC,special voltage can also be customized according to requirements ,and it can adapt to the low working voltage of universal mains in all regions.
2.The output is industrial three-phase power,but it is economical because it is based on civil single-phase electricity billing.
3.The core components are imported devices.Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi,high efficiency and stable performance,long service life,powerful protection functions,and convenient replacement and maintenance.
4.Using TI central processor DSP28335chip from USA,the response speed is rapid and accurate, providing a stable and clean power supply for the load.
5.Humanized safety design:adopts isolation transformer design.The input and output are completely electrically isolated.And the input and output are equipped with MCCB,which saves the switch for customers and is convenient and safe to install.Fully enclosed live parts prevent children from getting an electric shock.
6.Output perfect protection function,with output over-voltage,overload,short circuit,over temperature, self-diagnosis protection and other protection.
7.LCD+LED display,it display input and output voltage,current,power consumption,fault display, convenient for customers to quickly find faults and guide maintenance.
8.The whole machine adopts a modular design,plug-in type design,easy maintenance,reducing the hidden costs of machine failure to repair.
9.The converter has the function of filtering the grid disturbance and interference at the same time,which is a good performance of stabilized voltage and frequency power,to provide a more stable and pure power supply environment for the backend devices.
Product Parameters
|
Model |
BZT series |
|
Circuit Mode |
IPM module,SVPWM Modulation |
|
Output waveform |
Standard pure sine wave |
|
Input Voltage |
1 phase 2 wire/2 phase 3 wire/3 phase 4 wire+PE wire 50HZ/60HZ±10HZ(can customization) |
|
Output Voltage |
1 phase 2 wire/2 phase 3 wire/3 phase 4 wire+PE wire |
|
Output Frequency |
50HZ/60HZ(30-90HZ can continuously adjustable) |
|
Startup mode selection |
Stable frequency step-down start or frequency start (can be selected on the LCD screen settings) |
|
Frequency stability |
≤0.01% |
|
Load regulation |
≤3% |
|
THD |
≤2%(Linear load) |
|
Phase Angle |
120°±1° |
|
Crest Factor Ratio |
3:1 |
|
LCD display |
Output voltage,output current,output frequency,output power,fault code,time temperature, startup mode selection,setting parameters |
|
Protection Function |
output over-current protection,overvoltage protection, over-temperature protection, short circuit protection,under-voltage protection,and alarm delay of the buzzer function |
|
Protective Reaction Time |
≤2ms |
|
Machine efficiency |
≥94% |
|
insulation properties |
1800VAC/10mA/1min |
|
Insulation impedance |
500V DC/50MO |
|
Cooling method |
Forced air cooling |
|
Noise |
1m>60db |
|
Ambient temperature |
-25~55℃ |
|
Using environment humidity |
0~95%(No condensation) |
|
Remark |
The above parameters are for reference only,can be customized according to customer's requirement |